Mounting Distances; Figure 13: Mounting Distances; Figure 14: Control Cabinet Ventilation - KEB COMBIVERT F6 Series Instructions For Use Manual

DIMeNSIONS AND WeIGHTS

3.4.6.2 Mounting distances

Power dissipation for the control cabinet dimension
ation". A lower value can be used here depending on the operating mode/load.
Mounting distances
A
D
F
B
Figure 13: Mounting distances
If construction-conditioned the control cabinet cannot be without indoor ventilation, ap-
propriate filters must avoid suction of foreign objects.
Direction of the
airflow
Figure 14: Control cabinet ventilation
Mounting the drive controller
For reliable operation, the drive controller must be mounted without any dis-
tance on a smooth, closed, metallically bright mounting plate.
E
D C
Coolant inlet
„3.2.4 Power dissipation at rated oper-
Dimen-
Distance in mm
sion
A 150
B 100
C 30
D 0
E 0
X 50
1)
1)
Distance to preceding elements in the control cab-
inet door.
Front and side view of the coolant inlet
Coolant outlet
Distance in inch
6
4
1.2
0
0
2
55