Requirements; Configuration Tools; Clmd16 Software Update - Maretron M-Power CLMD16 Configuration Manual

____________________________________________________________

Requirements

Configuration Tools

This document outlines how to configure the CLMD16 using Maretron's N2KAnalyzer® V3
software in conjunction with either a Maretron USB100 or a Maretron IPG100 connected to an
active NMEA2000® network. For information on how to use Maretron's N2KAnalyzer® V3
software or to download the latest version of Maretron's N2KAnalyzer® V3 software please
visit:
https://www.maretron.com/products/N2KAnalyzer.php
For N2KAnalyzer® V3 software to configure a CLMD16 unit the CLMD16 unit must be
powered and connected to an active NMEA2000® network.

CLMD16 Software Update

Before attempting to configure CLMD16, always ensure that you are using the latest version of
Maretron N2KAnalyzer® V3 and install the latest software / firmware to your CLMD16 unit
using N2KAnalyzer® V3. To update software for CLMD16 first compare "Current Software" vs
"Available Software", right click CLMD16 inside N2KAnalyzer® and click on "Update Selected
Device's Software". A Dialog Box will appear showing the software update progress.
CLMD16 Configuration Guide Rev.1.1 1