____________________________________________________________
Automatic Periodic Load Turn On
This circuit example utilizes a "Flash Element" to operate a load called "Mast Strobe". The
following steps will outline how to configure this load to automatically turn On / Off with the
frequency of On for 3 Sec. and Off for 2 Sec. triggered by a momentary input.
Step 1:
Assign Momentary Input to Toggle Element:
In this example "Discrete I/O 8" is the input signal to enable the mast strobe circuit.
Step 2:
Where "0" is infinite cycles, set-up "Flash Element" details.
CLMD16 Configuration Guide Rev.1.1
29