CLMD16 Configuration Guide___________________________________
"Timer Element"
The "Timer" element is used to delay functions for any set time up to 18 hours and 12 minutes
per timer. See following "Timer" dialog for details on how to set-up a Timer Element.
"Toggle Element"
The "Toggle" element is a "Latch" element that does not require two separate Inputs to change
state but instead can turn its Output both On and Off using a single input. The "Toggle"
element will turn its output On when it detects an Input Signal and when it detects it's next
Input Signal it will turn its Output Off. See following dialog to familiarize the "Toggle" set-up.
8
CLMD16 Configuration Guide Rev.1.1