Page 2
Capacitive Touch Manual Override keypad to toggle the ECB's On / Off · The CLMD16 unit is controlled, and can control devices via NMEA 2000® network technology. To learn more about the MPower CLMD16's features please refer to the User's Manual CLMD16 Hardware Description: 10.97 [278.63] 8.50...
Page 3
CLMD16 Application: Apply the CLMD16 unit with any Maretron device running N2K view®, Maretron's CKM12 (12 Button Keypad) or VMM6 (Contura® Digital Switch Module, 6 Rocker) and third party MFDs supporting NMEA2000® standard switching PGNs. The CLMD16 comes pre-configured with an Out of Box Configuration that allows all 16 ECB outputs to be switched by network devices supporting NMEA2000®...
Page 4
Installation Principal: MARETRON CLMD16 16 Channel DC Load Module OVERRIDE DIAG CAN-A CAN-B Manual Override Loads POWER on the CLMD16 Using the CLMD16's Integrated Capacitive Touch Keypad CLMD16 LED: Touch Switch Green ON, steady (Output is activated) 8-32VDC 125A ON, flashing (Overcurrent / short circuit)
Page 5
MARETRON VMM6 MARETRON CKM12 MARETRON TSM810C THIRD PARTY MFD TOUCH SCREEN CONTROL TOUCH SCREEN CONTROL AND MONITOR AND MONITOR Easily Expand Your MPower System with Choose From a Other Maretron Variety of Control MPower Devices Devices for the CLMD16 MARETRON CLMD12...
Page 6
OFF, (No communication) LED: POWER Green ON, steady (Normal operation) BARCODE ON, flashing (Unit exceeded 125A Max) ON, steady (Reverse polarity) S/N: 0000000 www.maretron.com (666) 550-9100 - J4 / CAN-A - -J5 / CAN-B - Pin: Pin: Analog / Digital...
Page 8
CLMD16 For Additional Information About Your CLMD16 Scan this QR Code: Technical Support: If you require technical support for Maretron products, you can reach us in any of the following ways: Telephone: 1-866-550-9100 Fax: 1-602-861-1777 E-mail: marine.support@carlingtech.com World Wide Web: http://www.maretron.com Mail: Carling Technologies, Inc.