Configuring Authentication Methods for Port Access
Users can choose between having a single authentication method, such as
RADIUS, or an authentication method where a Local authentication service is
used in addition to the RADIUS, LDAP, TACACS+ server, or Kerberos. These
options are listed when you configure the Digi CM for authentication. To
configure a Digi CM for authentication, do the following:
1. Access the web interface.
2. Under the Serial Port heading, choose Configuration.
3. Choose All or an Individual port > Authentication.
4. From the drop down menu, choose an authentication method. A configura-
5. Fill in the appropriate fields.
6. Choose Save & apply changes.
Chapter 7
tion screen for that particular authentication method is displayed.
The following figure displays the parameters for setting up a RADIUS
server as the primary authentication server and Local authentication if the
primary authentication method fails.
Configuring Security and Authentication
55