Adding A Pc Modem - Digi Connectware CM User Manual

Adding a PC Modem

6. Choose Save & apply.
Adding a PC Modem
A PC card slot is provided on the front panel of the Digi CM. The graphic below
has an arrow indicating the PC card slot.
To install and configure the PC modem on the Digi CM, do the following.
1. Insert the card into the PC slot.
2. Access the web interface.
3. From the menu, choose Configuration under the PC card heading.
4. Choose Discover a new card.
5. Enter the appropriate parameters in the configuration menu.
6. Choose Save & apply.
66
• Modem init string: The default modem init string is q1e0s0=2. The init
string sets the modem to quiet mode, echo off, and Auto Answer on two
rings. The modem init string is used for initializing an external modem
attached to a Digi CM serial port. See your modem user manual for
more information.
The Digi CM searches for a PC card and displays a configuration menu.
PC card slot
Chapter 9