Using The Configuration Menu - Digi Connectware CM User Manual

Using the Configuration Menu

6. Choose Save & apply.
Using the Configuration Menu
Dial-in Modem Access
Individual serial ports on the Digi CM can be configured for dial-in modem
access. To use dial-in modem mode, an external modem is first attached to a
serial port and then the serial port is configured for dial-in modem access. In
the illustration below, port 7 is configured for a dial-in modem.
To configure a serial port for a dial-in modem, do the following:
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number and then Host mode configuration.
4. Choose Dial-in modem and configure the other configuration parameters.
5. Use the ESC key to return to the main menu.
6. Choose Save changes.
Dial-in Terminal Server Access
Individual serial ports on the Digi CM can be configured for a dial-in terminal
server access. To use dial-in terminal server access, an external modem is
first attached to a serial port on the Digi CM and then the serial port is
configured for dial-in terminal server mode. In the illustration below, port 7 is
configured for dial-in terminal server mode.
In terminal server mode, the user is connected directly to a server.
To configure a serial port for a dial-in terminal server, do the following:
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number and then Host mode configuration.
68
• SSH break sequence: This is a sequence of characters that sends a
break character to a device.
• Inactivity timeout: The timeout length ranges from 1 to 3600 seconds; 0
is unlimited timeout.
• Modem init string: Use the default string or enter your own string.
Chapter 9