Configuring For Ssh - Digi Connectware CM User Manual

Configuring for SSH

Options
The Port Access Menu and individual ports can be configured for SSH.
The Digi CM
Configuring the Port Access Menu for SSH
supports Blow-
1. Access the web interface.
fish and 3DES
encryption meth-
ods for SSH.
2. Log in as root, admin, or a member of the port administration group. The
3. Choose Serial port > Configuration > Port access configuration menu.
4. Choose SSH as the Port access menu protocol.
5. Choose Save & apply.
Configuring a Port for SSH
1. Access the web interface.
2. Log in as root, admin, or a member of the port administration group. The
3. Choose Serial port > Configuration.
4. Choose the port or ports you want to configure for SSH.
5. Choose Host mode configuration.
6. Specify SSH as the Protocol.
Chapter 2
default password for root is dbps, and the default password for admin is
admin.
The Port access configuration menu appears.
default password for root is dbps, and the default password for admin is
admin.
Getting Started
17