Table of Contents
Advertisement
Configuring For Dial-In Terminal Server Access
To configure a serial port for a dial-in terminal server access, enter the values
for these fields: Host mode, Destination IP, Base Port, Protocol, Inactivity
timeout, and Modem init string. To access the Host mode configuration screen,
do the following:
1. Access the web interface.
2. Under the Serial Port heading, choose Configuration.
3. Choose a specific port under Individual port configuration and then choose
4. Choose Dial-in terminal server for the Host mode.
5. Fill in the appropriate fields as they apply to your configuration.
Chapter 9
Host mode configuration.
•
Host mode: The options are console server mode, terminal server
mode, dial-in modem mode, and dial-in terminal server mode.
•
Type of Console Server: The options are MS SAC console or Other.
•
Assigned IP: This is also known as alternate IP, where the user can Tel-
net directly to a serial port using an IP address.
•
Listening TCP port: This is also known as reverse Telnet, where a user
Telnets to a port using an IP address and a port number.
•
Destination IP: In terminal server mode, the user connects directly to a
port using an IP address.
•
Destination port: In terminal server mode, the user connects directly to
a port with an IP address and port number.
•
Protocol: The options are SSH, RawTCP, and Telnet.
Configuring Remote Dial-In Access
67
Advertisement
Table of Contents
