Configuring Authentication For The Web Server - Digi Connectware CM User Manual

Configuring Authentication for the Web Server

Configuring Authentication for the Web Server
1. Access the web interface.
2. Choose Network > Web server configuration.
3. Choose an authentication method and then Save & apply.
56
The following screen appears.
Note: When using remote authentication for the web server, such as Radius, TACACS+,
LDAP or Kerberos, you must also add the user to the local database. See "Add-
ing, Editing, and Removing Users" on page 83 for details. Once the user's pass-
word is approved by the authentication server, the Digi CM uses the local
permission rights to provide proper access privileges for the user to ports and the
configuration.
Chapter 7