Setting Date And Time - Digi Connectware CM User Manual

Setting Date and Time

The alternative method to reset the unit is through the web interface. The web
interface provides the option of retaining the IP settings. To use the web
interface to reset the Digi CM, do the following:
1. Access the web interface.
2. Under the System administration heading choose Factory default settings.
.
3. Choose Reset. The Digi CM will automatically reboot.
The following are the default values when the Digi CM is reset to the factory
defaults.
•
•
•
•
•
Setting Date and Time
The Digi CM provides two options for keeping system time. The first is by
using an NTP server and the other is through an internal battery backup. To
configure the Digi CM for date and time, do the following:
1. Access the web interface.
2. Under the System administration heading, choose Date and time.
3. To use an NTP server, choose Enable, the NTP server's IP address, the
4. Choose Save & apply.
82
Static IP Address: 192.168.161.5
Port Access Menu IP Address: 192.168.1.100
Port Access Menu TCP Port Number: 7000
Serial Port IP Address: 192.168.1.101-
Serial Port TCP Port Number: 7001-
Time offset, and the Date and Time fields.
or
To use the internal battery fill in the Date and Time fields only.
Chapter 12