Configure For Ssh; Options; Configure The Port Access Menu For Ssh - Digi CM 8 User Manual

Getting started
Enter the number to exit and apply changes.Changes are saved and applied immediately. There
is no need to reboot.

Configure for SSH

Note The the Digi CM unit supports Blowfish and 3DES encryption methods for SSH.

Options

The Port Access Menu and individual ports can be configured for SSH.

Configure the Port Access Menu for SSH

1 Access the web interface.
2 Log in as root, admin, or a member of the port administration group. The default password for
root is dbps, and the default password for admin is admin.
3 Under Serial port > Configuration > Port access menu configuration.
The Port access configuration menu appears.
4 Select SSH as the Port access menu protocol.
Digi CM User Guide

Configure for SSH

23