Table of Contents
Advertisement
Security for the Z45 Controller
6. In the IP Address fields, enter an allowed IP address or mask bit.
Note
If you entered a mask bit, you must also create an entry for LAN access. This is used
when you are on your local network and connected to the network using an Ethernet cable.
7. Specify the phone numbers to which you want to send a text message.
a. Scroll to the IP White List section and make sure that Enabled is selected in the
b. Scroll to the SMS Management section.
c. From the SMS Services list box, select Enabled.
d. From the White List Status list box, select Enabled.
e. In the Phone Number fields, enter the phone numbers to which a text message
8. Click Update.
Configure SSH Access for a Z45 Controller
Enable SSH access to allow SSH access from LAN Only, WAN Only, or both.
1.
Log in to a device's web UI from
2. Click Admin Main.
3. In the Services section, click Security Preferences. The Security Preferences page displays.
4. Display the SSH Access section.
5. To enable SSH, choose Enabled from the SSH Service list box.
6. In the Port field, enter the port number used for the SSH service.
7. You can change the password.
Note
The SSH password should be changed if SSH is enabled. For file transfers, the Secure
Copy (SCP) utility can be used with the same log in credentials as SSH.
a. In the Current Password field, enter the current password.
b. In the New Password field, enter the new password.
c. In the Confirm Password field, re-type the new password.
8. Click Update.
Welcome to Digi SkyCloud
White List Status list box.
should be sent.
SkyCloud.
Configure SSH Access for a Z45 Controller
80
Advertisement
Table of Contents
