Table of Contents
Advertisement
Figure 18.
4.
Click the letter
5.
Scroll down the page until you find the firmware for the transmitter or the receiver.
6.
Click
Release Notes
7.
Click the
8.
Follow the on-screen instructions to download the firmware. Make a note of where the
firmware file is stored on the PC.
ATTENTION:
•
•
Updating Firmware on a DTP2 211 Device
1.
Download the latest version of the firmware to your PC.
2.
Connect the PC to the DTP2 211 device via the front panel USB port (see
to the Front Panel USB Port
3.
Open the Firmware Loader via the Firmware Loader icon installed during the
download (optional) or your desktop
selections:
Start > All Programs > Extron Electronics > Firmware Loader > Firmware
Loader
The
Firmware Loader
figure 19).
Figure 19.
4.
In the
menu.
Firmware Page with Alphabetic Navigation Bar
from the alphabetic navigation bar (see figure 18,
D
for more information about the program (optional).
link on the right.
Download
The extension of the firmware file must be
incorrect extension may cause the device to stop functioning.
L'extension du fichier firmware doit être
mauvaise extension, l'appareil peut arrêter de fonctionner.
on page 17) of the transmitter or receiver.
window opens. The
Opening Firmware Loader
window, select the DTP2 211 from the
Add Device
. Opening a file with an
.s19
. Si un fichier est ouvert avec une
.s19
menu by making the following
Start
window opens in front (see
Add Device...
Device Names
DTP2 T/R 211 • Remote Control
).
1
Connecting
drop-down
26
Advertisement
Table of Contents
