Table of Contents
Advertisement
5.6.2 Speed calibration
The ZDR 6020 takes the speed information from an adapter connected to the
internal car communication system (CAN bus). The extracted signal is proportional
to the vehicle speed and needs to be calibrated for proper mileage calculation.
Click on "Calibrate – Setup – Speed Calibration" in the main menu to open the
speed calibration window:
The button is disabled if the measuring head is not connected to the system.
New Calib:
Recalibrate:
Apply:
Remove:
Back arrow:
For detailed explanation on how to do the speed calibration, see chapter 7 "Speed
Calibration" on page 57.
New speed calibration
Recalibrate existing speed calibration
Activate current speed calibration from list
Remove highlighted speed calibration
Close the speed calibration dialog
Page 35
Advertisement
Table of Contents
