Table of Contents
Advertisement
6.1 Country regulations
Please take into consideration that several countries have certain regulations
concerning the measurement of road markings. Please inform yourself before
starting to measure in order to comply with these regulations.
6.2 Setting up the system
Preparing the system for measuring involves placing the tablet in the docking
station, starting the RetroGrabber software and attaching and levelling the
measuring head. Follow the guide below to set up the system:
Put the lever on the docking station's upper side in open position. Place the tablet in
the docking station and push down the lever, lock docking station with the key if
needed.
Start the car and then switch on "Main" on the panel:
Lever in locking position
Tablet
Docking station
Lever in open position
Push down lever
Lever in locking position
Page 47
Advertisement
Table of Contents
