5.8.5 Bar Graph settings
The bars in the bar diagram can be configured in the "Bar Graph Settings".
Show simplified Bar-graph:
Show grey Bars on Bar-graph: Hides bars that are not recognized as
5.8.6 System configuration
There is no need to change the settings in this window for normal operation.
Only use this window if you are asked to do so by an administrator.
More advanced features like filter settings can be configured in the System
Configuration. Click on "System Configuration" in the configuration window to open
the system configuration window:
Measure Control:
Bar in the bar graph is rectangular
markings
Internal use only
Page 41