Proceq ZDR 6020 Instruction Manual page 31

Measurements:
New:
Measurement Name: Filename, compulsory
Region:
Street:
Lane:
Start Position:
Side:
Driver Name:
Marking Presetting: Selection of Marking Presetting, default = last setting
Comments:
Direction:
List with all measuring files from the current project
Opens an editor mask with file header information, see
picture below:
Measuring area, optional
Street name, optional
Lane name, optional
Start position (km) of measurement, default = 0
Lane position, optional
Name of the operator, optional
Comments, optional
Counting mileage upwards (up) or downwards (down)
Page 31