Table of Contents
Advertisement
4.4 Carrier pipe
The carrier pipe is located underneath the car. It is securely mounted to the
vehicle`s chassis, there are black protective caps fixed by fasteners on either end.
The measuring head is fixed to the carrier pipe with a special mounting adapter.
There is an adapter for the right and left side respectively.
4.5 Tablet, docking station and tablet mount
A ruggedized touchscreen tablet is used to operate the ZDR 6020. With the
installed RetroGrabber software, it communicates with the measuring head and
records measured data to its hard drive.
The tablet is connected to a docking station on a tablet mount, which is installed on
the co-driver's seat.
External connector
Carrier pipe
Fasteners
Protective cap for console
Angle adjustment screw
Mounting adapter
Fasteners
Quick release
Ruggedized touchscreen tablet
Page 18
Advertisement
Table of Contents
