Table of Contents
Advertisement
5
RetroGrabber Software
The RetroGrabber software is needed to operate the ZDR 6020 Dynamic Retro-
reflectometer R
. It performs the following operations:
L
•
Obtaining the measurements from the measuring head
•
Calculating an average value of all received sensor signals
•
Verifying and filtering single values according to filter settings
•
Averaging single measurements according to the given interval
•
Storing the measured value together with additional information in the
measuring file
5.1 Installation
For the current version, the software needs to be installed and configured at our
premises.
5.2 Program start
To start the RetroGrabber software, click on the RetroGrabber icon on the desktop
or navigate to Start - Programs - Zehntner – RetroGrabber.
5.3 Main screen
The main screen is divided into three sections:
1. Main window
2. Main menu
3. Status bar
5.3.1 Main window
Based on the chosen menu item different dialogs and submenus appear in the main
window. Usually this will be the measuring window.
Page 25
Advertisement
Table of Contents
