Bhl Trim Installation - Assa Abloy Sargent 8200 Series Installation Instructions Manual

BHL Trim
8200 Series
Installation Instructions
6 Door Preparation (cont .)
11. Turn-piece functions only: install turn-piece thru-bolt plate using truss head screw. (Leave screw
slightly loose.) (Figure 15)
12. Insert mortise lockbody into door and loosely tighten 1" lock
NOTE:
Make sure lock is unlocked. (Figure 16)
7

BHL Trim Installation

1. Install strike using 3/4" strike mounting screws.
NOTE:
Strike must be oriented with strike lip towards pull side of door. (Figure 10)
2. Cylinder functions only:
• Slide cylinder(s) through spring, spacer and collar, threading into lockbody until cylinder face is
NOTE:
Pull key slightly out of cylinder to help thread into lockbody.
NOTE:
Cylinder must be oriented correctly. (Figure 12)
3. Cylinder functions only:
• Tighten cylinder set screw. (Figure 13)
4. Fully tighten lock mounting screws.
1-800-727-5477 • www.sargentlock.com
Copyright © 2019, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or
in part without the express written permission of SARGENT Manufacturing Company is prohibited.
mounting combination screws.
flush with collar. (Figure 11)
Figure 17
Thru-bolt Plate
Figure 15
Strike Lip
Figure 18
NOTE:
Key and cylinder must
be rotated as shown
Correct
8
Unlocked
Locked
Figure 16
Incorrect
Figure 19 Figure 20
A8131F 08/19