Assa Abloy Sargent 8200 Series Installation Instructions Manual page 5

BHL Trim
8200 Series
Installation Instructions
44 Change Lock Function (cont .)
Items needed to create each of the following functions:
Function
04 (F07) -
Store Room
Closet Lock
05 (F04) -
Office or Entry Lock
06 - Store room or
Service Lock
13 (D31) -
Communicating or
Exit Lock
31 - Utility Lock
36 - Closet Lock
37 (F05) -
Classroom Lock
38 (F32) -
Classroom Security
Intruder Latchbolt
Lock
#41 Cylinder is standard for both single & double cylinder functions for 1-3/4" thick door.
** 130 KB thumb turn is used with rose trim only. Escutcheon trims requiring thumb turns must be
preassembled at factory.
NOTE:
Trim-one-side functions always require an inside trim assembly which can be used on the inside or
outside of the door (to order Trim one-side kit (for all trim except PT or FE) order part # 82-4611.
1-800-727-5477 • www.sargentlock.com
Copyright © 2019, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or
in part without the express written permission of SARGENT Manufacturing Company is prohibited.
Outside Inside Trim One
Lever Lever Side Kit
X X
X X
X
X
X
X
X X
X X
5
Outside Inside
Cylinder Cylinder
X
X
X X
X
X X
X X
X
X X
Thumb
turn
X**
A8131F 08/19