B&R Mobile Panel 40 User Manual page 9

Version Date
1.66 2010-02-01
1.70 2013-05-22
1.71 2013-11-12
1.80 2018-12-05
Mobile Panel 40/50 User's manual V1.80
Change
• Updated section 5.6.1 "EC declaration of conformity" on page
• Updated section 5.6.2 "EC type examination certificate" on page
• Changed section "Organization of notices" on page
ings.
•
Revised section "USB flash drives" on page 102
5MMUSB.1024-00; updated 5MMUSB.2048-01).
• Revised section 6.2 "Protective cover" on page
• Updated and moved "HMI Drivers & Utilities DVD"
• Removed section "Preventing screen burn-in on LCD/TFT monitors" from chapter 7 "Service and main-
tenance".
• Moved "B&R Key Editor" from appendix A to Software.
• Revised "B&R Automation Device Interface (ADI) Control Center" on page
•
Updated "B&R Automation Device Interface (ADI) Development Kit" on page
•
Changed section "Adhesive labels" to
•
Revised Fig. 50 "Keys and LEDs in the matrix" on page
•
Moved "Wall mount" from Technical data
• Updated the following sections in
display" on page 79, "Pixel errors" on page
• Revised entire manual according to current formatting standards.
• Revised section "Recommended monitoring devices" and renamed to
• Revised section "Stop button" on page
revision J0 or later.
• Updated "B&R Automation Device Interface (ADI) .NET SDK" on page 85
•
Updated "B&R Automation Device Interface (ADI) Development Kit" on page 84
•
Updated "HMI Drivers & Utilities DVD" on page 124
•
Updated B&R USB flash drive 5MMUSB.4096-01, see
• Updated section "B&R KCF Editor" on page
•
Removed figure index, table index, model number index, index and register markings.
•
Updated approved fuse per UL 248 in section
reference to this note in the technical data under
Table 1: Manual history
100.
101.
13. Updated descriptions for cautions and warn-
(removed 5MMUSB.0256-00, 5MMUSB.0512-00 and
107.
from appendix A to "Accessories".
"Serial number adhesive label"
74.
to Accessories.
3 "Commissioning": "User tips for increasing the service life of the
79.
129. A different stop button is installed on MP50 devices with
to version 2.20.
"5MMUSB.xxxx-01" on page
87.
Commissioning from a safety point of view
Control device.
General information
82.
84.
and revised it.
"Connection examples".
to V2.00.
to V3.60.
104.
as well as a
9