General Information; Manual History - B&R Mobile Panel 40 User Manual

1 General information

Information:
This document is not intended for end customers! The
must be incorporated into the operating instructions for end customers in the respective national lan-
guage by the machine

1.1 Manual history

Version Date
0.10 Preliminary October 2006
1.00 2007-02-13
1.10 2007-03-26
1.20 2007-04-18
1.30 2007-07-18
1.40 2007-10-17
1.41 2007-11-06
Mobile Panel 40/50 User's manual V1.80
manufacturer or system provider.
Change
•
First version
•
Updated 3 "Commissioning" on page
on page 88, 6 "Accessories" on page 102
• Completed 2 "Technical data" on page
•
Discontinued USB
•
Updated model numbers of
• Moved connection box and box cable to
• Revised 5 "Standards and
• Updated images.
• Updated Windows CE
• Updated description of
• Changed emergency switch-off to stop button.
• Revised introduction.
• Revised section "Complete system" on page
• Revised figures.
• Revised technical data of the complete system and individual components.
• Changed membrane keypad description.
•
Updated "Storing the Mobile Panel device" on page
•
Updated "Connecting a Mobile Panel 100/200" on page
•
Revised section "USB interface" on page
•
Revised 4 "Software".
• Revised 6 "Accessories".
• Updated section "Viewing angles" on page
• Updated section 7 in
• Updated 1 "General
• Updated section "Serial number adhesive label" on page
• Updated technical data of the devices (ambient temperatures, humidity, sea level)
• Updated "Temperature/Humidity diagram" on page
• Revised technical data of
• Revised brief description of devices in the model number overview.
• Revised technical data of 5CAMPH.0xxx-30 attachment cables.
• Updated new Windows CE
• Updated section "Touch screen calibration" on page
•
Updated information about temperature/humidity diagrams.
•
Added note in appendix.
• Changed viewing angle definition (a, b, c, d changed to R, L, U, D).
•
Updated information to avoid screen burn-in.
•
Updated ADI Control
Center" on page 82).
• Updated information for
• Updated information about loop resistance of stop circuits.
• Updated section "Date/Time setting" on page
• Revised index.
• Updated section "B&R Key
• Updated section "Key configuration" on page
• Updated Windows CE
•
Updated section "Configuring Windows CE ProPlus Thin Client Automation Runtime (TCAR)" on page
81.
•
Changed structure of the
•
Replaced API with ADI
•
Removed UL approval for robotics applications (UL 1740:1998).
Table 1: Manual history
safety guidelines required for end customers
66, 4 "Software" on page
and 7 "Servicing/Maintenance" on page
15.
flash drive 5MMUSB.0256-00 and
control devices.
6 "Accessories".
certifications".
order numbers.
"Attachment cables" on page 57.
17.
111.
73.
137.
"Connection example for stop button" on page
information".
36.
control devices (Ethernet controllers).
model numbers and revised section
78.
Center description (see section
touch screen calibration.
78.
Editor".
78.
description (see section "Windows CE" on page
"Serial number adhesive label" on page
(Automation Device Interface).
General information
80, 5 "Standards and certifications"
127.
USB flash drive 5MMUSB.1024-00.
72.
70.
30.
"Windows CE" on page
"B&R Automation Device Interface (ADI) Control
80).
30.
80.
7