Wall Mount; 4Mpbra.0000-01; General Information - B&R Mobile Panel 40 User Manual

6.3 Wall mount

6.3.1 4MPBRA.0000-01

6.3.1.1 General information

Wall mount 4MPBRA.0000-01 is used to store the Mobile Panel
cable and is only intended for suspended vertical installation.
Drilling holes for attaching the wall mount must be made per diagram
110.
Caution!
The wall mount should be installed in a location where the Mobile Panel is not exposed to direct heat
sources or direct sunlight. The wall mount should also be positioned in a way that does not impair
operation of the stop button.
Danger!
If the Mobile Panel
tionality must be ensured, i.e. the attachment cable and
nected.
6.3.1.1.1 Components
Mobile Panel 40/50 User's manual V1.80
device is stored on a wall mount in the machine's danger zone, stop button func-
Device carrier
Cable suspension
Figure 73: 4MPBRA.0000-01 - Components
device together with the Mobile Panel attachment
"4MPBRA.0000-01 - Dimensions" on page
control cabinet cable must be completely con-
TOP
BOTTOM
Accessories
109