Enable Switch - B&R Mobile Panel 40 User Manual

Appendix A
A.2 Enable switch
Information:
The following specified characteristic data, features and limit values are only valid for these individual
components and may differ from those of the complete system. The data specified for the complete
system applies to the complete system in which this individual component is used, for example.
Properties
Output type
Switchable nominal voltage
Switchable nominal current
Maximum interrupting current
Circuit 1
Circuit 2
Maximum inductive load
Circuit 1
Circuit 2
Reverse polarity protection
Circuit 1
Circuit 2
Short circuit and overload protection
Circuit 1
Circuit 2
Switching cycles
Switch position 2
Switch position 3
Actuating force
From switch position 1 to 2
From switch position 2 to 3
Specifications for EN ISO 13849-1:2008
Enable
Category
Performance level
Proof test interval
MTTF symmetrized per D.2 of
d
PFH
d
Panic
Category
Performance level
Proof test interval
MTTF symmetrized per D.2 of
d
PFH
d
1) The monitoring device is not accounted for in the MTTF
130
EN ISO 13849-1
EN ISO 13849-1
specifications. See also TBD.
d
Enable
Solid-state output
(voltage tolerance 19.2 VDC to 30 VDC per
500 mA (max.)
145 mJ / 1.16 H @ 24 VDC, 500 mA (comparable to DC13 per
145 mJ / 1.16 H @ 24 VDC, 500 mA (comparable to DC13 per
Yes (integrated in output FET)
Yes (by protective circuit)
Typically 5 N
Typically 20 N
1.35x 10
switch
24 VDC
EN 61131-2)
1.5 A
0.8 A
EN 60947-5-1)
EN 60947-5-1)
Yes
Yes
10
5
5x 10
4
3
d
20 years
78 years
1.57x 10
-7
3
d
20 years
88 years
-7
Mobile Panel 40/50 User's manual V1.80