Connection; Attachment Shaft - B&R Mobile Panel 40 User Manual

Commissioning

3.3 Connection

The Mobile Panel is connected using the Mobile Panel attachment cable

3.3.1 Attachment shaft

The attachment cable is connected to the ST1
in the attachment shaft.
Connector for external wiring
Not used
RS-422-A/RS-232-C
Not used
(dummy connector
sealed)
68
(control devices and power supply) and ST2 (Ethernet) connectors
Buzzer ST3 USB client
Main connector ST1
(pin connector)
Control devices and
control line
Dummy plug Female serial port connector
must be
Not used
used to
seal the device!
Figure 42: Attachment shaft
(see "Attachment cables" on page
Dip switches
Not used
ST2 Ethernet
for data exchange
Backup battery
Reset button
für Windows CE- Reboot.
Note!
All unsaved
data will be lost.
Stress relief and
protection against kinks
in the attachment cable (can
be used on left or right side).
Note!
On the opposite side,
use a dummy plug!
Mobile Panel 40/50 User's manual V1.80
57).