Commissioning
3.8
Touch screen
B&R
touch screen
devices are equipped with a
means that these devices are pre-calibrated at the factory. This feature offers great advantages especially for
replacement parts since recalibration is usually no longer required when replacing a
We still recommend calibration for best results and to adapt the
Regardless of this, the touch driver requires a one-time calibration during or after installation.
3.8.1
Windows CE
Windows CE
starts the
touch screen
livered state).
3.9 Date/Time setting
The real-time clock in the Mobile Panel 40/50 is not backed by a battery. If necessary, the time must be set each
time the
device
is restarted (disconnection of power supply or restart).
The time
can
be set by double-clicking the time display on the desktop or via Start > Settings >
> Date/Time.
3.10 Key configuration
Not all keys are predefined in the factory setting for Mobile Panel devices. Keys
B&R Key Editor (version 2.60 or later) -
Following configuration with the B&R Key Editor and creation of the project, the new key configuration file (.kcf)
can
be transferred to the
>
Control
Center, tab Keys, e.g. using a
78
calibration
calibration sequence during its first boot in its default configuration (i.e. de-
see "B&R Key Editor" on page
device
via online "update" using the
USB
flash drive.
Figure 57: Key configuration update
touch screen controller
touch screen
86.
Control
Center (Start > Settings >
that supports hardware calibration. This
device
(identical model/type).
to the needs of the user.
can
be configured easily with the
Mobile Panel 40/50 User's manual V1.80
Control
Panel
Control
Panel