Operating The Mobile Panel - B&R Mobile Panel 40 User Manual

All safety functions have a dual-circuit design so that up to
13849-1:2008
It is the machine manufacturer's responsibility to select a handheld terminal suitable for the
figure any additional add-on options in accordance with the legally required danger and risk assessment.
The information in chapter
terminal must also be observed.

3.2 Operating the Mobile Panel

Caution!
• When routing or laying cables, make sure that there is no danger of tripping that could cause
the Mobile Panel
• The Mobile Panel attachment cable is not permitted to be crushed or run over sharp edges that
which can damage or chafe the cable jacket.
• Operating a Mobile Panel with a damaged attachment or
• When the Mobile Panel is not in use, it should be safely stowed away on the intended wall
mount. If the Mobile Panel
button functionality must be ensured, i.e. the attachment cable must be connected.
• If temporarily putting down the Mobile Panel device, do not place it face down in a way that
could damage the
• The touch screen
knives, screwdrivers, etc. These objects will cause irreparable damage to the
ideal object
"Touch screen stylus pen" on page
• Only one point on the
simultaneously
• Placing objects on top of the
• Never lay the
• Never expose the
• Ensure that no foreign bodies or liquids penetrate the interior of the device.
• Pressing several function or system keys simultaneously
some circumstances.
Information:
• All protective coverings, housing screws, cable grommets and the
checked periodically for damage.
• For instructions on how to clean the Mobile Panel device,
Mobile Panel 40/50 User's manual V1.80
"European Union directives" on page 91
device to fall to the ground.
device is stored on a wall mount in the machine's danger zone, stop
control devices or inadvertently trigger actions.
is not permitted to be operated with sharp objects such as ballpoint pens,
for operating the touch screen
touch screen is permitted to be touched at a time. Touching several places
can trigger unintended actions.
touch screen
device down on unstable surfaces or shelves. It could fall and become damaged.
device to heat sources or direct sunlight.
safety category 3 PL d
regarding the intended use of the handheld
control
is the integrated
18). The touch screen can
is not permitted.
see "Cleaning" on page
Commissioning
can be achieved per
machine
cabinet cable is not permitted.
touch
touch screen stylus pen
also be operated with a finger.
can trigger unintended actions in
device housing must be
EN ISO
and to con-
screen. The
(2.2.1.6
127.
67