Impulse Counter - Interacoustics EyeSeeCam Instructions For Use Manual

EyeSeeCam vHIT Instructions for Use – EN Page 27
Figure 4-20 Data collection screen with an unaccepted lateral impulse

4.4.5 Impulse counter

Each correct impulse you perform will generate an increasing count number shown in parenthesis. This
number will count every impulse you perform that produces a green check mark, but not the impulses
that produce red X's. In the final report, the number of impulses will be the same as you see during the
data collection unless there was artifact or noise present, and then the final algorithm will remove that
tracing from the final report.
Figure 4-21: Data collection screen with Auto-Stop set to 7