Maintenance; How To Clean Interacoustics Products; Concerning Repair - Interacoustics EyeSeeCam Instructions For Use Manual

EyeSeeCam vHIT Instructions for Use - EN

5 Maintenance

The operator is responsible for the perfect state of the instrument. It is recommended by Interacoustics to
have safety checks carried out at one-year intervals.
Immediate maintenance is required if:
the instrument was subjected to extreme mechanical stress (impact, defective cable
•
due to inadmissible traction);
fluid gets into the instrument;
•
cables and/or connectors are defective;
•
rubber-joints have developed cracks.
•
For further details please contact your Interacoustics representative.

5.2 How to clean Interacoustics Products

If the surface of the instrument or parts of it are contaminated, it can be cleaned using a soft cloth
moistened with a mild solution of water and dish washing cleaner or similar. The use of organic solvents
and aromatic oils must be avoided. Always disconnect the USB cable during the cleaning process, and be
careful that no fluid is entering the inside of the instrument or the accessories.
•
Before cleaning always switch off and disconnect from power
•
Use a soft cloth lightly dampened with cleaning solution to clean all exposed surfaces
•
Do not allow liquid to enter the camera housing
•
Do not autoclave, sterilize or immerse the instrument or accessory in any fluid
•
Do not use hard or pointed objects to clean any part of the instrument or accessory
Recommended cleaning and disinfection solutions:
•
Warm water with mild, nonabrasive cleaning solution (soap)
Procedure:
•
Clean the instrument by wiping outer case with a lint free cloth lightly dampened in cleaning
solution
5.3

Concerning repair

Interacoustics is only considered to be responsible for the validity of the CE marking, effects on safety,
reliability and performance of the equipment if:
1. assembly operations, extensions, readjustments, modifications or repairs are carried out by
authorised persons,
2. a 1 year service interval is maintained
3. the electrical installation of the relevant room complies with the appropriate requirements, and
4. the equipment is used by authorised personnel in accordance with the documentation supplied by
Interacoustics.
It is important that the customer (agent) fills out the RETURN REPORT every time a problem arises and
sends it to
DGS Diagnostics Sp. z o.o.
ul. Sloneczny Sad 4d
72-002 Doluje
Polska
Page 43