Training Guide; Start Test - Interacoustics EyeSeeCam Instructions For Use Manual

EyeSeeCam vHIT Instructions for Use – EN

4.4.3 Training guide

Before starting the test you can also decide if you need to use a training guide. Head impulses that are in
the accepted range will peak in the dark red or blue shaded area which has a lower cut-off of 150
degree/sec and must peak by 80 ms into the thrust. When the requirements are met, the waveforms for
head and eye movements will be shown together with a check mark. If the head impulse does not meet
these requirements a cross will be shown. The head movements are seen as grey lines and the eye
movements as black lines.See figure 4-18 above.

4.4.4 Start test

Select Start and begin doing lateral impulses.
Figure 4-19 Data collection screen with an accepted lateral impulse
Page 26