Calibration Report- Standard; Head Calibrations - Interacoustics EyeSeeCam Instructions For Use Manual

EyeSeeCam vHIT Instructions for Use – EN
4.2.3

Calibration report- standard

After the calibration procedure is finished a full report will be generated automatically in a separate
window. The software will automatically correct for any offsets in the calibration allowing you to store the
corrected calibration.
Figure 4-9 Completed Calibration
When asked whether you want to use this new calibration, select Yes in order to store this calibration
data with the patient file, or No if you want to use the Default calibration.
Figure 4-10 Save calibration file
4.3

Head calibrations

You can begin testing without calibrating by just selecting a test and starting the impulses. In this case a
default calibration will be taken. This is a good solution for difficult situation or challenging patients, but we
still recommend that the user perform a calibration whenever possible.
After completing the standard (eye) calibration, then you should calibrate the head position of the patient
before beginning impulses. You can click on the Head calibration heading in the recordings menu to
begin.
Page 21