Engine Hood; Engine Hood; Cx75Sr, Cx80; Cx135Sr - Case CX75SR Operator's Manual

1
CT02D285
Lift the hood to the maximum so that it gets locked
with the supporting prop.
CT02D287
To open the right-hand section (2), lift it manually
until it is folds back on the left-hand section (1).
NOTE: The left-hand section (1) has to be open to
lift section (2).
To close, operate the screw of the supporting prop
then pull down and slam the hood, both sections
close.
1
CT02D070
6-34551NA
CHAPTER 3 - INSTRUMENTS AND CONTROLS
2
Figure 79
Figure 80
2
Figure 81
Issued 8-04 Bur

ENGINE HOOD

CX75SR, CX80

To open, press the button and lift the hood.
CT02C104
Lift the hood to the maximum so that it gets locked
with the compressed air cylinder.
To close, pull the hood down and slam it down to lock
it.
Use the key switch to lock the hood.
CT02C105

CX135SR

To open, pull the handle and lift the hood.
CT02C106
Figure 82
Figure 83
Figure 84
3-27