Case CX75SR Operator's Manual page 137

3. Clean the grease adaptor and fitting and then
lower the raised track to the ground.
4. Repeat Steps 1 to 3 for the other track.
IMPORTANT: If the grease fitting adaptor is
damaged, grease may leak out. Check the condition
of the grease fitting adaptor regularly and replace it if
necessary.
CT02D178
TRACK TENSION VALUE
The value (A) should be between:
Machines
Rubber tracks
Steel tracks
Rubber tracks and
steel chains
TIGHTENING TORQUE OF THE TRACK SHOE
The tightening torque of the bolts should be between:
CX75SR, CX80 = 220 to 270 Nm (162 to 199 ft. lb.)
CX135SR = 390 to 430 Nm (287 to 317 ft. lb.)
Follow the prescribed order.
CS00E504
6-34551NA
CHAPTER 6 - MAINTENANCE AND ADJUSTMENTS
Figure 8
CX75SR, CX80 CX135SR
125 - 135 mm
(4.9 - 5.3 in)
180 - 205 mm 240 - 269 mm
(7.0 - 8.0 in) (9.4 - 10.5 in)
160 - 185 mm
(6.2 - 7.2 in)
Figure 9
Issued 8-04 Bur
6-5