Case CX75SR Operator's Manual page 49

1. Suspension adjustment
The adjustment can be done from 50 to 120 kg
(110 to 264 lb.). Turn the switch (1) in the + or -
direction.
1
CT02C076
2. Forward/reverse position adjustment
Hold the control (2) in raised position, slide the
seat to the required position and then release the
control.
CT02C077
3. Seat plate adjustment
To raise or lower the front of the seat, hold the
lever (3) in raised position. Move with the seat to
the desired position and then release the lever.
To raise or lower the rear of the seat, hold the
lever (3) in lowered position. Move with the seat
to the desired position and then release the lever.
6-34551NA
CHAPTER 3 - INSTRUMENTS AND CONTROLS
Figure 48
2
Figure 49
Issued 8-04 Bur
CT02C078
4. Seat back angle adjustment
To adjust the seat back angle, hold the lever (4)
in raised position. Move with the seat back to the
desired position and then release the lever.
WARNING: Before tilting the seat back it is
essential for the armrests to be in raised
position to prevent them from fouling the
control levers.
4
CT02C079
5. Lumbar support adjustment
Use the inflation bulb (5) to inflate the lumbar
suppor t. Press the button on the tip of the
inflation bulb (5) to deflate the lumbar support.
5
CT02C080
3
Figure 50
Figure 51
Figure 52
3-21