Case CX75SR Operator's Manual page 143

CT02D204
CX75SR, CX80
1. Remove the mounting bolts (1). Use the
adjustment screws (2) to push the alternator
inwards.
2. Remove the belts that are worn out.
3. Install one or two new belts.
4. Adjust the belts using the screw (2).
5. Tighten the mounting bolts (1).
6. Run the engine for about an hour and then check
the belt tension again.
CT02D201
CX135SR
IMPORTANT: The two belts have to be changed at
the same time.
1. Remove the mounting bolts (1). Use the
adjustment screws (2) to push the alternator
inwards.
2. Remove the belts that are worn out.
3. Install one or two new belts.
4. Adjust the belts using the screw (2).
5. Tighten the mounting bolts (1).
6. Run the engine for about an hour and then check
the belt tension again.
6-34551NA
CHAPTER 6 - MAINTENANCE AND ADJUSTMENTS
Figure 29
2
1
Figure 30
Issued 8-04 Bur
1
1
CS99A852
2
Figure 31
6-11