Engine Hood - Case CX300C Operator's Manual

Engine hood

Opening
Use the ignition key to open the panel. To open the hood,
turn and pull the handle. Raise the hood completely until
the strut locks automatically in position.
Closing
WARNING
Moving parts!
Make sure the hood is closed properly before
driving the machine.
Failure to comply could result in death or se-
rious injury.
After lightly lifting the hood and pulling the struts, lay the
hood down and lock it. To lock the hood, set the front latch
with the ignition key.
3 - CONTROLS/INSTRUMENTS
W0280A
3-72
1
DU3Y32-005
2
DU3Y32-004