Connecting One Or Two Booster Batteries; Connecting One Or Two Booster Batteries; Alternator; Alternator - Case CX75SR Operator's Manual

CONNECTING ONE OR TWO BOOSTER
BATTERIES
WARNING: Connecting
wrongly or short-circuiting batteries terminals
can cause an accident. Connect auxiliary
starting cables
instructions.
M a ke s u r e t h a t t h e b o o s t e r b a t t e r y vo l t a g e
corresponds to the voltage system of the machine.
1. Remove the protective mat, if necessary.
2. Remove the terminal sleeves.
3. Connect the positive (+) auxiliary cable to the
positive (+) terminal of the battery or the first
battery of the machine.
4. Connect the negative (-) auxiliary cable to the
negative (-) terminal of the battery or the second
battery of the machine.
5. Start the engine.
6. Disconnect the negative (-) auxiliary cable then
the positive (+) auxiliary cable from the booster
batteries.
7. Install the terminal sleeves.
8. Install the protective mat, if necessary.

ALTERNATOR

MAINTENANCE SPECIFICATION

Check . . . . . . . . . . . . . . . . . . . . . Every 1000 hours
WARNING: Whenever
welding operation
(authorized by the manufacturer and in
accordance with his instructions) or any
repairs on the electrical system, disconnect
the B+ and D+ wires from the alternator.
When reconnecting, check the markings on
the wires.
Do not use steam cleaning equipment or a cleaning
solvent to clean the alternator.
Ask your Dealer to check the alternator.
Make sure that the terminal protectors are correctly
installed.

STARTER MOTOR

MAINTENANCE SPECIFICATION
Check . . . . . . . . . . . . . . . . . . . . . Every 1000 hours
7-8
CHAPTER 7 - ELECTRICAL
auxiliary cables
as per the following
carrying out
on the machine
Ask your Dealer to check the starter motor.
NOTE: Make sure that the terminal protectors are
correctly installed.
a
Issued 8-04 Bur 6-34551NA