Replacing The Batteries - Cx135Sr - Case CX75SR Operator's Manual

WARNING: Do not invert battery terminals.
Connect positive cable ends to positive (+)
terminals and negative cable ends to
negative terminals (-).
WARNING: Always store batteries in a safe
place, out of the reach of children.
CT02D260

REPLACING THE BATTERIES - CX135SR

REMOVAL
1. Remove the terminal sleeves, disconnect the
cables (negative ter minal) then the cables
(positive terminal).
CT02D254
2. Remove the nuts, the washers and the holding
frame.
6-34551NA
CHAPTER 7 - ELECTRICAL
Figure 11
Figure 12
Issued 8-04 Bur
CT02D254
3. Remove the batteries using the handles.
4. Clean the battery compartment, remove all
foreign bodies, clean any spilled electrolyte.
CT02D254
INSTALLATION
1. Install new batteries. Clean the cables and
battery terminals and coat them with grease.
2. Install the holding frame, the washers and tighten
the nuts.
3. Connect the cables (positive terminal), the
cables (negative ter minal) then install the
terminal sleeves.
CT02D254
Figure 13
Figure 14
Figure 15
7-7