Fire Extinguisher (Not Supplied); Fire Extinguisher (Not Supplied); Welding On The Machine; Welding On The Machine - Case CX75SR Operator's Manual

It is strongly recommended to have a fire extinguisher and to place it in the rear left-hand side compartment in the
bracket designed for the purpose.
MAINTENANCE SPECIFICATION
Every month ........................................................... examine the fire extinguisher and make sure it is not damaged.
Every six months .......................... have an approved specialist empty and refill the powder in the fire extinguisher.
Every year ...................................................................... have an approved specialist examine the fire extinguisher.
CS98M573
Whenever carrying out a welding operation on the undercarriage or upperstructure carriage as authorized by the
manufacturer and in accordance with his instructions, disconnect the batteries, disconnect the alternator B+ and
D+ terminal wires, and connect the welding apparatus ground cable to the component on which the welding
operation is to be performed.
Never connect the welding apparatus to the undercarriage when welding on the upperstructure (or vice-versa).
Never connect the welding apparatus ground to a component of the hydraulic system.
WARNING: Any unauthorized modifications
made to this machine can cause serious
injury. Do not undertake any modifications
without first consulting your Dealer.
When cleaning the plastic windows, the console, the instrument panel, the indicators, etc. do not use gasoline,
kerosene, paint solvents, etc. Only use water, soap and a soft cloth.
The use of gasoline, kerosene, paint solvents, etc. will cause discoloration, cracks or deformation of these parts.
6-34551NA
CHAPTER 6 - MAINTENANCE AND ADJUSTMENTS

FIRE EXTINGUISHER (NOT SUPPLIED)

Figure 43

WELDING ON THE MACHINE

PLASTIC AND RESIN PARTS

Issued 8-04 Bur
6-15