Clock Setting Mode; Clock (24H) Setting Procedures - Hitachi ZW 120-6 Operator's Manual

Table of Contents

Advertisement

Clock Setting Mode

The clock display on the machine information display screen
can be set in the clock setting mode.
f
NOTE: If battery power is interrupted for an extended period
of time, the time display screen may indicate "Year of 2000,
Month of 1, day of 1, and time of 00:00" when the engine is
restarted.

Clock (24H) Setting Procedures

After selecting the clock display on the information display
screen, press and hold both selectors (1 and 3) at the same
time for more than 1 second to shift the information display
screen to the clock setting mode.
1. Year Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired year, determine the displayed
year by pressing monitor display mode selector (1). Then,
move to the next setting screen.
2. Month Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired month, determine the displayed
month by pressing monitor display mode selector (1). Then,
move to the next setting screen.
3. Day Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired day, determine the displayed
day by pressing monitor display mode selector (1). Then,
move to the next setting screen.
4. Hour Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired hour, determine the displayed
hour by pressing monitor display mode selector (1). Then,
move to the next setting screen.
5. Minute Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired minute, determine the
displayed minute by pressing monitor display mode
selector (1). Then, clock setting is complete.
OPERATOR'S STATION
1-40
3
2
1
Year
Month
Day
Hour
Minute
MPTC-01-019
M4GB-01-057

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents