Inspection/Maintenance Side Access Cover
d
CAUTION:
Always close side covers (1) during traveling and/or
working operation.
Do not keep the side cover open on a slope or when
a strong wind is blowing. Failure to do so may be
dangerous because the side cover may unexpectedly
close.
Take care not to pinch your fingers when opening/
closing side covers (1).
As the side cover flips up by itself, care should be
taken not to contact with the cover when opening it.
Before checking around the engine, be sure to lock
the cover in position with locking rod (3) provided
inside the side cover.
Never attempt to stand on fenders (2) if side covers
(1) are provided with fenders (2).
f
NOTE: Lock side cover (1) in position with locking rod (3).
OPERATOR'S STATION
1-93
1
2
MNSC-01-021
3
MNSC-01-022