Controller Part Name and Function
Mode/Temperature Control Switch
Mode Switch (3)
Selects the air vent. The selected air vent is indicated on
monitor (1).
:
Front Vent Mode
:
Front/Rear Vent Mode
:
Front/Rear/Foot Vent Mode
:
Foot Vent Mode
:
Foot/Defroster Vent Mode
:
Defroster Vent Mode
Each time mode switch (3) is pressed, the vent location can
be changed in 6 stages as illustrated below.
AUTO
Press defroster switch (4) to change defroster
mode.
AUTO mode
The air vent location is automatically selected.
Temperature Control Switch (3):
Sets temperature in the cab.
Temperature in the cab can be set from 18.0 to 32.0 °C
(64 to 90 °F) by rotating temperature control switch (3).
Temperature can be set by 0.5 °C (33 °F) increments.
The set-temperature is displayed on monitor (1).
OPERATOR'S STATION
vent
1-117
3
4
MNEC-01-006
1
MNHG-01-103EN