Faqs - ScreenBeam 1100 Plus User Manual

FAQs

How can I tell if my device supports Wi-Fi Miracast?
Look for one of the following Miracast applications on your device. Only some application
names are listed below. Different manufacturers may have different names for the Miracast
apps on their products. But, they should indicate similar meaning.
Connect

Wireless display

Wireless mirroring

 Screen mirroring
 AllShareCast (Samsung devices only)
 Cast screen
Visit ScreenBeam 1100 Plus compatibility page for the recommended Miracast devices.
Do I need to install drivers/apps to use the ScreenBeam 1100 Plus Receiver?
For Windows 8.1/10, you only need to install the latest Windows updates.

For Android 4.4 or higher, no app is required.

For Apple devices that support AirPlay, no app is required.

For ChromeOS devices with Cast, no app is required.

How can I improve my video/audio performance?
You can try the following methods to improve the ScreenBeam 1100 Plus' video/audio
performance:
 Place your device closer to the receiver.
Connect your device to a wireless network that is using a cleaner wireless channel or

change the wireless channel on the current wireless network, and then connect the
device to the receiver.
Turn off the Wi-Fi devices that are not in use currently.

What wireless signal range can I expect with the receiver?
The receiver is designed to be used in the same room with the source device. For best
performance, the source device should be placed within 20 meters to the receiver.
How can I adjust the display to fit properly to my TV screen?
You can adjust the display by using the receiver's Local Management Interface or
ScreenBeam Central Management System.
Log into the receiver's Local Management Interface and adjust the display in the Adjust

TV Screen Size section of the Features page.
In the ScreenBeam Central Management System, double click the receiver to open the

receiver configuration page, and then adjust the TV screen size in the Features section.
How to set the ScreenBeam video output to fit a display with aspect ratio other than
94