Receiver Management Access Settings; Specifying Screenbeam Cms For The Receiver - ScreenBeam 1100 Plus User Manual

4. Click the Apply button, and then click OK on the pop-up message box to confirm.
V.3.10 Receiver Management Access Settings
This section introduces settings for receiver management.
V.3.10.1

Specifying ScreenBeam CMS for the Receiver

To specify a CMS server for the receiver, follow this procedure:
Go to the Management Access tab page by clicking the Management Access tab.
1.
Go to the Central Management System Settings section, and define the CMS Server
2.
and the CMS Communication Port.
CMS Server: It is the IP address or the FQDN/hostname/domain name/alias name (if a

DNS server and an DHCP server are properly configured) of the server that hosts the
ScreenBeam CMS. It supports a domain with six labels at most.
Note: It is recommended to use DNS configuration for CMS Server.
CMS Communication Port: It is the communication port of the ScreenBeam CMS. The

port range is from 5000 to 65535. By default, 7237 is used.
77