Table of Contents
Advertisement
Select an option from the Receiver Name Placement drop-down box.
4.
5.
Click the Apply button, and then click OK on the pop-up message box to confirm.
V.3.6.3 Setting up Information Display on RTC Screen
To set up the receiver's information display on RTC screen, follow this procedure:
Go to the Features tab page by clicking the Features tab.
1.
2.
Go to the Display Setting section, and select a desired option from the ScreenBeam
network and status information menu. Available options are: Display all, Display
minimal, and Display none.
Display all: The receiver displays all network and status information on the
connected display.
60
Advertisement
Table of Contents
