Table of Contents
Advertisement
V.2.1
Method 1: ScreenBeam Local Wi-Fi Network
1.
Connect the client device's Wi-Fi to the wireless network (AP SSID) as shown on the TV
display.
2.
Enter the password for the wireless network. By default, the password is screenbeam
(case-sensitive).
3.
The Ready to Connect screen on the display will show the IP address assigned to the
ScreenBeam.
Note:
If the receiver is not connected to any existing wireless network or LAN, its IP
address is 192.168.26.1.
39
Advertisement
Table of Contents
