Vi.1.2 Updating Firmware From The Internet - ScreenBeam 1100 Plus User Manual

7. The receiver reboots and upgrades itself after the file is uploaded successfully. Firmware
upgrade status is displayed on the connected display.
8. When the receiver returns to the Wireless Display Ready to Connect Screen, the
receiver has been upgraded.
Warning! Do NOT power off your receiver during the upgrade process. The upgrade
will take some time. Please be patient.

VI.1.2 Updating Firmware from the Internet

Users can wirelessly update the receiver's firmware with the online update server.
To upgrade your receiver from the Internet, follow this procedure:
1. Ensure the receiver is connected to a network that has access to the Internet.
2. Log into Local Management Interface on ScreenBeam 1100 Plus, and go to the
Firmware Upgrade tab page by clicking the Firmware Upgrade tab.
On the Firmware Upgrade tab page, users can check the current firmware version in
the Firmware Version section.
3. Click the Check for Updates button next to the From the Internet box. If there is new
firmware update available, a message will show in the From the Internet box as "Newer
83